Topologi jaringan:
Konfigurasi:
Router 0:
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.1.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 192.168.0.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface Ethernet 0/0/0
Router(config-if)#ip address 192.168.5.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface Ethernet 0/1/0
Router(config-if)#ip address 192.168.6.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#redistribute eigrp 1 metric 0
Router(config-router)#redistribute ospf 1 metric 0
Router(config-router)#network 192.168.1.0
Router(config-router)#network 192.168.0.0
Router(config-router)#exit
Router(config)#router eigrp 1
Router(config-router)#redistribute rip metric 256 0 255 255 1500
Router(config-router)#redistribute ospf 1 metric 256 0 255 255 1500
Router(config-router)#network 192.168.5.0 0.0.0.255
Router(config-router)#exit
Router(config)#router ospf 1
Router(config-router)#redistribute rip subnets
Router(config-router)#redistribute eigrp 1 subnets
Router(config-router)#network 192.168.6.0 0.0.0.255 area 0
Router(config-router)#exit
Router(config)#ip nat inside source list 1 interface FastEthernet0/0 overload
Router(config)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router dengan Routing Protokol RIPv2
Router 1:
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.1.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 192.168.2.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 192.168.2.0
Router(config-router)#network 192.168.1.0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 2:
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.0.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 192.168.4.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface Ethernet 0/1/0
Router(config-if)#ip address 192.168.3.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 192.168.0.0
Router(config-router)#network 192.168.3.0
Router(config-router)#network 192.168.4.0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 5:
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.3.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 192.168.7.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router rip
Router(config)#version 2
Router(config-router)#network 192.168.3.0
Router(config-router)#network 192.168.7.0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 6:
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.4.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 192.168.8.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router rip
Router(config)#version 2
Router(config-router)#network 192.168.4.0
Router(config-router)#network 192.168.8.0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router dengan Routing Protokol EIGRP
Router 3:
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface Ethernet 0/0/0
Router(config-if)#ip address 192.168.5.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 192.168.9.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface Ethernet 0/1/0
Router(config-if)#ip address 192.168.10.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router eigrp 1
Router(config-router)#network 192.168.5.0 0.0.0.255
Router(config-router)#network 192.168.9.0 0.0.0.255
Router(config-router)#network 192.168.10.0 0.0.0.255
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 7:
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.9.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 192.168.13.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router eigrp 1
Router(config-router)#network 192.168.9.0 0.0.0.255
Router(config-router)#network 192.168.13.0 0.0.0.255
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 8:
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface Ethernet 0/1/0
Router(config-if)#ip address 192.168.10.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 192.168.14.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router eigrp 1
Router(config-router)#network 192.168.10.0 0.0.0.255
Router(config-router)#network 192.168.14.0 0.0.0.255
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router dengan Routing Protokol OSPF
Router 4:
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface Ethernet 0/0/0
Router(config-if)#ip address 192.168.6.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.12.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 192.168.11.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router ospf 1
Router(config-router)#network 192.168.6.0 0.0.0.255 area 0
Router(config-router)#network 192.168.11.0 0.0.0.255 area 0
Router(config-router)#network 192.168.12.0 0.0.0.255 area 0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 9:
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.11.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 192.168.15.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router ospf 1
Router(config-router)#network 192.168.11.0 0.0.0.255 area 0
Router(config-router)#network 192.168.15.0 0.0.0.255 area 0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 10:
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.12.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 192.168.16.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router ospf 1
Router(config-router)#network 192.168.12.0 0.0.0.255 area 0
Router(config-router)#network 192.168.16.0 0.0.0.255 area 0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Tugas Akhir Semester 2 Jaringan Komputer
Redristribute Dynamic RIP, EIGRP & OSPFTopolgi jaringan :
Konfigurasi Router :
Untuk Router dengan Routing Protokol EIGRP :
Router 0:
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.0.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 192.168.3.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#ip dhcp pool lan1
Router(dhcp-config)#network 192.168.3.0 255.255.255.0
Router(dhcp-config)#default-router 192.168.3.1
Router(dhcp-config)#dns-server 192.168.3.2
Router(dhcp-config)#exit
Router(config)#
Router(config)#router eigrp 1
Router(config-router)#network 192.168.0.0 0.0.0.255
Router(config-router)#network 192.168.3.0 0.0.0.255
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 1 :
Router>enable
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.1.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 192.168.4.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router eigrp 1
Router(config-router)#network 192.168.1.0 0.0.0.255
Router(config-router)#network 192.168.4.0 0.0.0.255
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 2 :
Router>enable
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
1. Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.0.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 192.168.1.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 1/0
Router(config-if)#ip address 192.168.2.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router eigrp 1
Router(config-router)#network 192.168.0.0 0.0.0.255
Router(config-router)#network 192.168.2.0 0.0.0.255
Router(config-router)#network 192.168.1.0 0.0.0.255
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 3 :
Router 3 merupakan Redistribute dari ketiga protokol:
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 192.168.2.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 172.16.0.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface FastEthernet 0/1
Router(config-if)#ip address 10.0.0.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface FastEthernet 1/1
Router(config-if)#ip address 172.16.11.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#redistribute eigrp 1 metric 0
Router(config-router)#redistribute ospf 1 metric 0
Router(config-router)#redistribute static metric 0
Router(config-router)#network 172.16.0.0
Router(config)#router ospf 1
Router(config-router)#redistribute rip subnets
Router(config-router)#redistribute eigrp 1 subnets
Router(config-router)#redistribute static subnets
Router(config-router)#network 10.0.0.0 0.0.0.255 area 0
Router(config-router)#network 172.16.11.0 0.0.0.255 area 0
Router(config-router)#exit
Router(config)#router eigrp 1
Router(config-router)#redistribute rip metric 256 0 255 255 1500
Router(config-router)#redistribute ospf 1 metric 256 0 255 255 1500
Router(config-router)#network 192.168.2.0 0.0.0.255
Router(config-router)#no auto-summary
Router(config-router)#exit
Router(config)#ip route 172.16.12.0 255.255.255.0 172.16.11.2
Router(config)#ip route 172.16.13.0 255.255.255.0 172.16.11.2
Router(config)#ip route 0.0.0.0 0.0.0.0 172.16.11.2
Router(config)#^Z
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Untuk Router dengan Routing Protokol RIPv2
Router 4 :
Router>enable
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 172.16.0.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 172.16.1.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 1/0
Router(config-if)#ip address 172.16.2.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 172.16.0.0
Router(config-router)#network 172.16.1.0
Router(config-router)#network 172.16.2.0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 5 :
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 172.16.1.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 172.16.4.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 1/0
Router(config-if)#ip address 172.16.3.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 172.16.1.0
Router(config-router)#network 172.16.3.0
Router(config-router)#network 172.16.4.0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 6 :
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 172.16.2.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 172.16.5.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 1/0
Router(config-if)#ip address 172.16.6.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 172.16.2.0
Router(config-router)#network 172.16.6.0
Router(config-router)#network 172.16.5.0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 7 :
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 172.16.3.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 172.16.7.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 172.16.3.0
Router(config-router)#network 172.16.7.0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 8 :
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 172.16.4.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 172.16.8.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 172.16.4.0
Router(config-router)#network 172.16.8.0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 9 :
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 172.16.5.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 172.16.9.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 172.16.5.0
Router(config-router)#network 172.16.9.0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 10 :
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 172.16.6.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 172.16.10.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 172.16.6.0
Router(config-router)#network 172.16.10.0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Untuk Router dengan Routing Protokol OSPF :
Router 11 :
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 10.0.0.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 10.0.3.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 1/0
Router(config-if)#ip address 10.0.4.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router ospf 1
Router(config-router)#network 10.0.1.0 0.0.0.255 area 0
Router(config-router)#network 10.0.3.0 0.0.0.255 area 0
Router(config-router)#network 10.0.4.0 0.0.0.255 area 0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 12 :
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 10.0.3.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 10.0.7.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router ospf 1
Router(config-router)#network 10.0.3.0 0.0.0.255 area 0
Router(config-router)#network 10.0.7.0 0.0.0.255 area 0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 13 :
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 10.0.4.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 10.0.8.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router ospf 1
Router(config-router)#network 10.0.4.0 0.0.0.255 area 0
Router(config-router)#network 10.0.8.0 0.0.0.255 area 0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 17 :
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 10.0.11.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 10.0.1.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 1/0
Router(config-if)#ip address 10.0.2.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router ospf 1
Router(config-router)#network 172.16.11 0.0.0.255 area 0
Router(config-router)#network 10.0.1.0 0.0.0.255 area 0
Router(config-router)#network 10.0.2.0 0.0.0.255 area 0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 18 :
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 10.0.1.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 10.0.5.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router ospf 1
Router(config-router)#network 10.0.1.0 0.0.0.255 area 0
Router(config-router)#network 10.0.5.0 0.0.0.255 area 0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
Router 19 :
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface fastEthernet 0/0
Router(config-if)#ip address 10.0.2.2 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fastEthernet 0/1
Router(config-if)#ip address 10.0.6.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#router ospf 1
Router(config-router)#network 10.0.2.0 0.0.0.255 area 0
Router(config-router)#network 10.0.6.0 0.0.0.255 area 0
Router(config-router)#^Z
Router#
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#
0 komentar:
Posting Komentar